90512 tkim/o2003tn (koto)/92098ha (kt)/4137ki/d176ta, ts no.2063-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 2sb1143/2sd1683 bipolar transistor (?) 50v, (?) 4a, low v ce ( sat ) , ( pnp ) npn single to-126ml stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? voltage regulators, relay drivers, lamp drivers, electrical equipment features ? adoption of fbet, mbit processes ? low saturation voltage ? large current capacity and wide aso speci cations ( ): 2sb1143 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--)60 v collector-to-emitter voltage v ceo (--)50 v emitter-to-base voltage v ebo (--)6 v collector current i c (--)4 a collector current (pulse) i cp (--)6 a collector dissipation p c 1.5 w tc=25 c10w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7516a-002 ordering number : en2063c product & package information ? package : to-126ml ? jeita, jedec : to-126 ? minimum packing quantity : 200 pcs./bag marking electrical connection 1 : emitter 2 : collector 3 : base to-126ml 0.8 0.75 2.4 4.8 0.8 0.7 8.0 4.0 1.0 1.0 3.6 1.4 1.6 1.5 1.7 7.5 3.0 15.5 11.0 3.3 3.0 123 lot no. rank b1143 lot no. rank d1683 2 1 3 2sd1683 2 1 3 2sb1143 2SB1143S 2sb1143t 2sd1683s 2sd1683t
2sb1143 / 2sd1683 no.2063-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)40v, i e =0a (--)1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)1 a dc current gain h fe 1v ce =(--)2v, i c =(--)100ma 100* 560* h fe 2v ce =(--)2v, i c =(--)3a 40 gain-bandwidth product f t v ce =(--)10v, i c =(--)50ma 150 mhz output capacitance cob v cb =(--)10v, f=1mhz (39)25 pf collector-to-emitter saturation voltage v ce (sat) i c =(--)2a, i b =(--)100ma (--350)190 (--700)500 mv base-to-emitter saturation voltage v be (sat) i c =(--)2a, i b =(--)100ma (--)0.94 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--)60 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)6 v turn-on time t on see speci ed test circuit. (70)70 ns storage time t stg (450)650 ns fall time t f (30)35 ns * : the 2sb1143/2sd1683 are classi ed by 100ma h fe as follows : rank r s t u h fe 100 to 200 140 to 280 200 to 400 280 to 560 switching time test circuit ordering information device package shipping memo 2SB1143S to-126ml 200pcs./bag pb free 2sb1143t to-126ml 200pcs./bag 2sd1683s to-126ml 200pcs./bag 2sd1683t to-126ml 200pcs./bag i c =10i b1 = --10i b2 =1a (for pnp, the polarit y is reversed.) v r r b v cc =25v v be = --5v + + 50 input outpu t r l 25 100 f 470 f pw=20 s i b1 d.c. 1% i b2
2sb1143 / 2sd1683 no.2063-3/7 i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ce collector-to-emitter voltage, v ce -- v i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a collector current, i c -- a i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a i c -- v be base-to-emitter voltage, v be -- v collector current, i c -- a h fe -- i c collector current, i c -- a dc current gain, h fe h fe -- i c collector current, i c -- a dc current gain, h fe -- 5 -- 3 -- 2 -- 1 -- 4 0 0 --0.4 --0.8 --2.0 --1.6 --1.2 i b =0ma itr09047 2sb1143 --5ma --10ma --20ma --50ma --100ma --200ma 5 3 2 1 4 0 0 0.4 0.8 2.0 1.6 1.2 i b =0ma itr09048 2sd1683 5ma 10ma 20ma 80ma 60ma 40ma 100ma 0 --0.2 --0.4 --0.6 --0.8 --1.4 --1.2 --1.0 --4.8 --4.0 --3.2 --2.4 --1.6 --0.8 0 itr09051 ta=75 c 25 c --25 c 2sb1143 v ce = --2v 0 0.2 0.4 0.6 0.8 1.4 1.2 1.0 4.8 4.0 3.2 2.4 1.6 0.8 0 itr09052 ta=75 c 25 c --25 c 2sd1683 v ce =2v 2 3 5 7 1000 2 3 5 7 100 10 23 5 --0.01 23 5 5 --0.1 23 7 7 7 --1.0 itr09053 2sb1143 v ce = --2v ta=75 c 25 c --25 c 2 3 5 7 1000 2 3 5 7 100 10 23 5 0.01 23 5 5 0.1 23 7 7 7 1.0 itr09054 ta=75 c 25 c --25 c 2sd1683 v ce =2v --2.0 --1.2 --0.8 --0.4 --1.6 0 0 --4 --8 --20 --16 --12 i b =0ma itr09049 2sb1143 --2ma --4ma --6ma - -8ma --14ma --12ma --10ma 2.0 1.2 0.8 0.4 1.6 0 048 20 16 12 i b =0ma itr09050 2sd1683 2ma 1ma 3ma 4ma 6ma 5ma 8ma 7ma
2sb1143 / 2sd1683 no.2063-4/7 v ce (sat) -- i c collector current, i c -- a v ce (sat) -- i c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a cob -- v cb output capacitance, cob -- pf collector-to-base voltage, v cb -- v v be (sat) -- i c collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v v be (sat) -- i c base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a a s o collector current, i c -- a collector-to-emitter voltage, v ce -- v collector dissipation, p c -- w ambient temperature, ta -- c p c -- ta 23 5 0.1 10 23 5 0.01 23 57 7 7 1.0 100 10 2 5 7 1000 7 5 3 2 3 itr09055 2sb1143 2sd1683 1.0 10 7 3 5 100 10 2 3 5 2 27 35 100 27 35 itr09056 2sb1143 / 2sd1683 v ce =10v 2sb1143 2sd1683 2sb1143 / 2sd1683 f=1mhz 1.0 0.1 10 5 7 3 2 5 7 3 5 7 3 2 2 1.0 10 257 3 3 100 257 3 57 itr09061 0 12 10 8 4 6 2 1.5 0 20 40 60 100 120 160 140 80 itr09062 no heat sink 2sb1143 / 2sd1683 5 7 7 3 2 2 5 3 --1.0 --10 23 57 77 --0.01 23 5 23 5 --0.1 --1.0 itr09059 2sb1143 i c / i b =20 25 c 75 c ta= --25 c 5 7 7 3 2 2 5 3 1.0 0.1 10 23 57 77 0.01 23 5 23 5 0.1 1.0 itr09060 25 c 75 c ta= --25 c 2sd1683 i c / i b =20 100ms 10ms 1ms dc operation tc=25 c dc operation ta=25 c 2sb1143 / 2sd1683 i c =4a i cp =6a 2 5 7 3 2 5 7 3 2 5 3 --1000 --10 --100 23 57 77 --0.01 23 5 3 5 --0.1 2 --1.0 itr09057 2sb1143 i c / i b =20 75 c 25 c ta= --25 c 2 5 7 3 2 5 7 3 2 5 3 1000 10 100 23 57 77 0.01 23 5 3 5 0.1 2 1.0 itr09058 25 c ta=75 c -- 2 5 c 2sd1642 i c / i b =20 for pnp, the minus sign is omitted. for pnp, the minus sign is omitted. tc=25 c single pulse for pnp, the minus sign is omitted.
2sb1143 / 2sd1683 no.2063-5/7 bag packing speci cation 2SB1143S, 2sb1143t, 2sd1683s, 2sd1683t
2sb1143 / 2sd1683 no.2063-6/7 outline drawing 2SB1143S, 2sb1143t, 2sd1683s, 2sd1683t mass (g) unit 0.97 * for reference mm
2sb1143 / 2sd1683 ps no.2063-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
